The Best Hand Vacuum Fluid Pump
718 reviews analysed
1. Slippery Pete Fluid Pump for Quart Bottles – Transfer Gear Oil, Transmission and Differential Fluid with This 5cc Hand Pump (1)
- ????100% INSPECTED AND PACKAGED IN THE USA
- ????Fits securely on standard quart containers, which is about a 1″ opening (Will not fit Red Line quart containers or wide mouth quart containers, BUT Slippery Pete’s FLUID PUMP FOR GALLON BOTTLES WILL FIT Castrol Edge wide mouth quart containers!!)
- ????16” long flexible tube for pumping fluids into tight and awkward places. Rigid suction tube that reaches to bottom of STANDARD QUART CONTAINERS
- ????100% MONEY BACK GUARANTEE!
- ???? Easy to understand instructions on back of header card
Slippery Pete recently had to change the transmission fluid on his weekend convertible using synthetic ATF. His ride just hit 30,000 miles and he likes to take good care of his baby.
The handy FLUID QUART PUMP screwed on the bottle with no problem. The pump worked great. He didn’t have to worry about using a funnel and spilling fluid every where. He just aimed the flexible clear tube into the transmission and pumped away.
The best part is that he could easily control the amount of fluid being pumped and not worry about over filling.
All Slippery Pete products are INSPECTED AND PACKAGED IN THE USA!!!
2. OEM TOOLS 24938 9.5 Liter Pneumatic/Manual Fluid Extractor | Convenient Oil Change & Fluid Change Tool | Easy-to-Use Hand Pump and Vacuum Pump Functions | No Leaks, No Overfills
- VERSATILE AUTOMOTIVE FLUID REMOVER: Features a venturi valve and pumping handle, offering both pneumatic and manual fluid extraction methods.
- EASY TO USE: Remove any automotive fluid through dipstick tubes. Includes a 5 foot main suction flexible hose, and (2) 41″ extended dipstick hose adapters for a longer reach and broader applications.
- SAFE TO USE: 9.5 Liter single-piece reservoir features a leak-proof bottom. Overflow shutoff valve prevents fluid from overflowing—suction will stop once capacity is reached. Removable lid makes extracted fluids easy to recycle.
- EXTRACT A VARIETY OF FLUIDS: Can be used with low viscosity fluid, including water and coolant.
- FULL SPECS: 9.5 Liter Capacity
- Oversized pumping handle
- fluid extractor’s lid is removable to allow for easy recycling of waste fluid
- (2) 41 inch dipstick hose adapters, 5 foot main removal flex tube
- Working PSI: 85. Max PSI: 120 Air consumption: 6. 5 CFM.
EASY TO USE:
The OEMTOOLS 24398 9.5 Liter Pneumatic and Hand-Pump Fluid Evacuator is a remarkable time- and effort-saving oil change tool. The tool is designed to prevent mess, and to make it easy for anyone to change automobile fluids without needing to get under the vehicle or to use a shop lift. Attach your shop air compressor to this tool and quickly and completely drain automotive fluids directly from vehicles’ dipstick tubes.
NO MESS: The OEMTOOLS manual fluid extractor is thoughtfully designed with a shutoff valve that prevents overflowing. There’s a small float within the fluid receptacle that will be forced up, shutting off the intake valve, when fluid has reached maximum capacity. Then, because of the easy-to-remove lid, the oil or extracted fluid can be simply dumped into a recycling or waste fluid receptacle.
PRO & DIY MECHANICS:
This tool is perfect for both professional and DIY mechanics. Anyone who’s ever changed their oil at home has probably fantasized about changing their oil without the need to shimmy beneath their undercarriage. The OEMTOOLS fluid extractor makes this dream a reality. Pump fluids out from their dipstick tubes. No mess, no worries.
PRODUCT SPECIFICATIONS: – 9.5 liter fluid capacity.
– Hand pump and venturi valve for manual or pneumatic fluid evacuation. – Shut off valve (internal float shuts off suction when fluid is at max capacity).
– Fluid extractor’s lid is removable to allow for easy recycling or disposal of waste fluid. – 5 feet of pneumatic flex hose & 2 dipstick hose adapters.
– Updated 41 inch extended dipstick hose adapters for a longer reach and broader applications.
3. Koehler Enterprises RA990 Multi-Use Siphon Fuel Transfer Pump Kit (for Gas Oil and Liquids)
The Koehler Transfer Pump Kit allows for the safe and easy transfer of liquids between containers or vehicles, eliminating the risky practice of siphoning dangerous liquids by mouth. Transfer gasoline, oil, antifreeze and other liquids simply and quickly with no mess. The pump can also be adapted to an air pump function for inflating tires, air mattresses, sports equipment, water toys and other inflatables. Each kit includes a multi-use siphon pump, 1 each liquid intake and discharge hoses, two hose connectors, 1 each inlet and outlet nozzles, an air pressure hose and dipstick tube. Ideal for auto and equipment maintenance, RV and boat owners, farm, marine and industrial operations or any other application requiring easy and efficient fluid transfers.
4. HTOMT 2 in 1 Brake Bleeder Kit Hand held Vacuum Pump Test Set for Automotive with Sponge Protected Case,Adapters,One-Man Brake and Clutch Bleeding System (Gray)
- Easy Usage: Hand vacuum pump is easy to bleed your car brakes.
- Convenient Carrying: Portable kit which includes different adapters designed for all vehicles is suitable for both home and business applications.
- Widely Use: 4 tubes of different length to cover different needs.
- Vacuum Gauge: Equipped with vacuum gauge, convenient readout of pressure, Pressure range: 0-30inHg, 0-760mmHg
- Carry Case : Made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage
5. Mityvac MVA6851 Fluid Extractor
The MVA6851 has a fluid capacity of up to 7 oz. (200 cc) and is ideal for removing used fluids from master cylinders, transaxles, and power steering and coolant reservoirs prior to bleeding, fluid changes or repairs. Featuring a 7.5-in. (190 mm) flexible tube with non-drip cap, the fluid extractor’s lightweight, streamlined design enables access into tight spaces. Also, the tool is easy to clean, and the hose and seal are simple to replace. High Quality Image Specifications: Packaged Weight: 0.7 lb (0.32kg) Packaged Size: 11.8 x 2.5 x 2.5 (300mm x 140mm x 230mm)
6. Air Power America 2000LV Green Large Oil Extractor
- Easy to use
- 40 pump strokes creates a powerful vacuum – no electricity needed
- Fast – just a few seconds to drain oil from a small engine, takes a few minutes for large engines
- 8 quart capacity for big project large engine changes or multiple small engine changes
- Portable compact size, allows for easy oil changes in tight spaces
- No mess from spills or inconvenient drain plugs – used oil and other liquids are stored safely for proper disposal
Changing engine oil can be messy, time consuming and there is no good way to dispose of old oil. The LiquiVac is a new user friendly and environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, release the hose clamp and LiquiVac extracts the oil directly into its plastic holding tank. Works great for boats, cars, trucks and more. USA dimensions: 16 inch length x 7 inch width x 11 inch height, tank size: 8 gallon, suction hose length 48 inches.
Changing engine oil can be messy, time consuming and it is difficult to dispose of old oil. The LiquiVac is a user friendly and an environmentally safe oil changing system. It is fast, convenient and eliminates mess and clean-up. The LiquiVac works by creating a powerful vacuum that draws the used oil out of the engine and into a holding tank for easy disposal to a recycling center. Simply insert the extraction hose into the dipstick tube, pump the handle 40 times, open the cap’s valve and LiquiVac extracts the oil directly into its plastic holding tank. It works great for boats, cars, trucks–and small engines too.
Cars and Trucks Oil Change
The LiquiVac Oil Changing System for Large Projects and Engines makes car oil changes quick, clean, and easy. This is especially true with hard to access drain plugs found in large engines.
An average car or truck takes approximately 8-10 minutes to extract the oil, and without a mess. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes of boats, cars, and light trucks. Plus, its tank has an 8 quart capacity allowing the user to make multiple oil changes of small engines too.
The LiquiVac innovative design makes it easier to change the oil in engines such as boats with inaccessible drain plugs. The Large Engine/Project Model comes with a special narrow suction hose to fit dipstick tubes to make your 4-cycle outboard oil change and inboard oil change easy. Also, don’t forget the LiquiVac makes boat transmission changes very easy.
Small Engines: Lawnmowers, Generators, Power Washers, Snow Throwers, and More
Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil and, eventually, engine breakdowns.
With the LiquiVac small engine oil changes are a snap. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines super simple.
Which Model of LiquiVac Is Right for You?
LiquiVac Small Engine Model
Small Engine Model
Small engines seem to be the most ignored engines that a consumer owns. This has occurred because there are consumers who have their car oil serviced at the quick lube places. And, have entirely forgotten that all the small engines in their garages need their oil changed too. Unfortunately this neglect can be very costly since these engines run very hard and in dusty conditions, which can lead to dirty, grimy oil; and, then engine breakdowns.
But, now there’s a simple, fast and clean way to change your lawn and garden equipment’s oil. It’s the LiquiVac Oil Changing System. With the LiquiVac oil changes are a snap. The LiquiVac Small Engine Model works by creating negative pressure, or vacuum power in the tank by pumping the tank handle. Each pump stroke takes air out of the tank creating a vacuum. Just 20 quick pump strokes creates vacuum power in the tank. This vacuum is powerful enough to extract used oil out through the dipstick/fill tube with the release of the suction hose clamp, in just 14 seconds. (Extraction time is based on the typical 4-cycle engine containing 1 quart of oil). With this kind of powerful performance and ease of use the LiquiVac Small Engine Model takes maintenance on 4-cycle engines very easy. Perfect for lawn mowers, lawn & garden tractors, tillers, generators, snow throwers, ATVs and outboard motors as well as.
LiquiVac Large Project/Engine Model
Large Project/Engine Model
It is called the Large Project/Engine Model for a reason. Its 8 quarts capacity is large enough to handle several oil changes at one time, without recycling/emptying it. For example you can change your boat engine and several small engines in one session. Because of this, many do-it-yourself people love to knock out their oil change projects in one fell swoop. They can do it fast, without the mess. Plus, the Large Project and Large Engine Model works great for large engines such as hard to change boats (inboards and outboards), trucks, and cars too. It is also very handy for to change transmission oil and hydraulic fluids too.
7. Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters, Case
- Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. By using some of the included accessory caps and fittings it can also be used as a brake bleeder.
- Tester: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
- Complete kit includes accessories for both brake bleeding and automotive diagnosis. Vacuum pump set can test and diagnose a wide varity of parts and common systems on any vehicle.
- Easy to use: Easily bleed brakes by yourself. Coming with a carrying bag, made by high quality material, and easy to carry.
- 3 month limited warranty.
High Quality Car Auto Hand Held Vacuum Pistol Pump Brake Bleeder Adaptor Fluid Reservoir Tester Kit 2 in 1 Tool Kits
Condition: 100% brand new
Material: Alloy steel, plastics, rubber
Dimension of case: 13.5*8.7*2 inch / 34.3*22*5 cm
Pressure range: 0-30inHg, 0-760mmHg
_1 x vacuum pump/brake bleeder with vacuum gauge
_1 x reservoir jar & 2 x lids
_1 x “T” hose connector
_1 x straight hose connector
_1 x universal cup adapter
_1 x blow mold case
_1 x user manual
_2 x 24″ vacuum hoses
_2 x 3″ vacuum hoses
_2 x tapered hose adapters
_3 x brake bleeder valve adapters
Do not use the vacuum pump to siphon liquid Damage to the internal chamber will result in seals
8. VaygWay Siphon Oil Gas Pump- Liquid Air Fuel Fluid Tool-Transfer Pump Kit Extractor – Syphon Hose Car Auto SUV
- ✅ PREMIUM QUALITY – The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump is constructed out of premium quality material to provide you with the strongest most durable pump available. It has rubber hoses that can withstand chemical reaction brought about the varying fluids introduced to them. This item will last superbly year after year.
- ✅ COMPLETE – The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump includes all needed hoses, tubes and connectors as well as inflation adapters. The easy to use pump is extremely handy for any car owner.
- ✅ CONVENIENT – The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump can be used on any occasion. Instead of having to blow by mouth into your air mattress kid’s swimming pool, tube, rafts or even tires the VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump will do the job instead of you. Not only will it do your job but it will do it much faster.
- ✅ PUMPING – The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump intake tube is placed at the bottom of the liquid to be moved and the outgoing tube is fed into the receptacle receiving the liquid. Pump the handle a couple of times to prime the pump and then pull the handle fully out. To stop the flow at any time, simply depress the handle.
- ✅ THREE FUNCTIONS 3in1 – The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump moves large volumes of gas water or any other liquid. The Siphon function can draw fuel from tank or oil from crankcase. The Air pump can be used to inflate pool accessories air mattresses and more. When you’re stuck with an empty tank the VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump enables you to quickly and easily pump the gas from the carry on container to the gas tank.
The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump is constructed out of Premium Quality material to provide you with the Strongest most Durable pump available. It has rubber hoses that can withstand chemical reaction brought about the varying fluids introduced to them. This item will last superbly year after year. The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump is best for emergencies. When you’re stuck with an empty tank The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump enables you to Quickly and Easily pump the gas from the carry on container to the gas tank. That will comfortably take you to the nearest gas station where you can refuel once again.
The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump is a most important and practical accessory to always have in your car. It pumps Gas Oil or any Liquid into your car as well as Air into inflatable objects such as rafts, tires, swimming pools etc. When you’re stuck with an empty tank The VaygWay 3-in-1 Hand Siphon Emergency Vehicle Pump enables you to quickly and Easily Pump the gas from the carry on container to the gas tank. That will comfortably take you to the nearest gas station where you can refuel once again.
YOU WILL NEVER GO WRONG BY CHOOSING VAYGWAY 3-IN-1 HAND SIPHON EMERGENCY VEHICLE PUMP!!!!!!
9. ARES 70923-1-Liter Vacuum Brake Fluid Bleeder – Hanging Hook and Locking Trigger Allows for Hands Free Operation
- ITEM SPECIFICATIONS: This Brake Fluid Bleeder uses a standard workshop air supply and features a working pressure of 71-113 PSI with a maximum pressure of 113 PSI.
- CONVENIENCE: Our 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation.
- TRANSPARENCY: The transparent drain hose allows you to visually inspect the old fluid during the draining process. You can easily flush your entire disc or drum brake system with this brake fluid bleeder!
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES 1L Vacuum Brake Fluid Bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
10. DASBET Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive
- 【APPLICABLE】Providing 2 in 1 automotive solution: Brake bleeder & Vacuum pump tester. The vacuum pump is multi-functional, can be used to test essential vehicle settings and work as vacuum bleeder for brakes.
- 【FEATURE】Cushioned pistol grip handle Equipped with vacuum gauge, simple operation
- Pressure range: 0-30inHg, 0-760mmHg.
- 【FEATURE】Good sealing performance, convenient installation, exquisite design and simple operation.
- 【MATERIAL】Made of high quality material, alloy steel, plastics and rubber for durability.
- 【EASY STORAGE】Comes in a blow molded case for safe & easy transport and storage. NOTE:The Blow-molded case upgraded since Feb.,2019, all contents inside keeps same.One-year warranty service available. All products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
By our suggestions above, we hope that you can found Hand Vacuum Fluid Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!