The Best Pc Cooling Systems

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

ZOOMFLOW 240X SNOW

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Specifications:

Material: Copper

Color: Silver

Surface Treatment: Chromium Plating

Type: 6mm/ 7.2mm/ 9mm/ 11mm Diameter (Optional)

Applicable Tube:

6mm Diameter: for 5-5.5mm inner diameter hose

7.2mm Diameter: for 5-6.5mm inner diameter hose

9mm Diameter: for7-8mm inner diameter hose

11mm Diameter: for 9.5-10mm inner diameter hose

Package Weight: 60g

Package List:

6 * Barb Fittings

The Floe Riing RGB 360 TT Premium Edition is the world’s first 16.8 million colors liquid CPU cooler with three 120mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by Riing Plus RGB Software. Functions within the software also allow users to monitor fan performance and track CPU temperature. Enjoy better cooling performance and greater CPU protection with one simple upgrade!

Compatibility:
Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
Water Block: Material:Copper
Pump:
Rated Voltage:12 V/ 5V
Rated Current:0.325 A / 0.4A
Motor Speed:3600 R.P.M

Fan
Dimension:120 x 120 x 25 mm
Speed:500~1400RPM
Noise Level:19.8 ~ 24.7 dB-A
Rated Voltage:12 V
Max. Air Flow:14.2~42.34 CFM
Max. Pressure:0.17~1.54 mm-H2O
Connector:5 pin

Tube
Length:326 mm
Material:Rubber
Weight 1610g

Radiator: Dimension:393 x 120 x 27 mm

Compatibility:
Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150
AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box. For Android – Requires Android 6.0.0 or later with screen resolution 1920 x 1080

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18

2. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

3. Universal GPU block
Interface: G1 / 4 universal thread, diameter of 12.9mm
Material: Bottom: copper; Cover: POM high temperature materials
Waterway: 0.8MM parallel waterway
Compatibility: Matches a fan with a distance of 53 mm to 61 mm
Supported tube: 9.5mm ID / 12.7mm OD PU tube, or 10mmID / 16mmOD solid tube, or 8mmID / 12mmOD silicon tube (ID is the inner diameter, OD is the outer diameter)

4. Cylindrical Water Reservoir (including plastic bracket * 2, metal bracket * 2, screw pack * 1):
Water reservoir height: about 160mm
Water reservoir diameter: 5cm
Water reservoir interface: G1 / 4 universal thread
Interface diameter: 12.9mm

Package List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

Product Name: Water Cooling Radiator

Product Specifications:
– Fitting Thread: G1/4 Inch;
– Fin density: 18 lines per inch
– Color: Black; Product Weight: 106g
– Type: Water Cooling; Material: Aluminum
– Mouth: 9.5 (D) mm; Model Number: 80mm;
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D);
– Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H);
– Tube Quantity: 8; Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”; Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)

Product Features:
– Pure aluminum fins
– Parts brazing seal as a whole
– Surface treatment: Dark paint
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler; Material: Metal
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm

✔Optimized for high performance at low cost,No weak welds nor leakage.
✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.

Package Included:
1 x Aluminum Heat Exchanger High speed fan
NOTE: Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.

The Pacific C360 radiator is a high-performance 360mm copper radiator with high-density copper fin design and brass Tank. Built for 120mm high-static pressure fans with 27mm thickness for optimal heat dissipation, The radiator is manufactured from premium-quality materials that provide exceptional performance, unrivalled reliability. The unique stainless steel side panels guarantee the durability as well as reduce the weight of the radiator. Integrated G1/4″ Threads make it easy to install, while rigid connections Ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Pacific C radiator series meets your cooling needs in every way.

Specifications:
Main Color: Green and Black
Package weight: 2500g
1. 1 * 240mm black heat sink (with screw bag):
Appearance size: 27.5*11.8*3.2cm
Suitable tube: Diameter of 8-10mm/ 0.3-0.4in
Outdoor diameter: approx. 12.9mm/ 0.5in
Material: Aluminum
Number of waterways: 18
Application: water cooling system heat exchange
Surface treatment: powder coating
2. 2 * LED fans:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. 1 * CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775, 1150, 1155, 1156, 1366) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9mm
Size: bottom contact size: 5 * 5cm; thickness: 3mm
Material: Bottom: red copper; Cover: transparent plexiglass
4. 1 * Cylindrical water reservoir (with plastic brackets * 2, metal
5. 6 * PETG 50cm green hard tube (Note: Chamfer tools, pipe bending
6. 1 * Sine Wave Quiet Recycling Water pump for DDP computer (with shock pad):
7. 6 * 10×14 Two-Touch fitting:
8. 1 * Water feeder (No water):
Capacity: 250ml
9. 1 * Water plug:
10. 1 * Nnipple connector:
11. 1 * Vent plug:

Package List:
1 x 240mm Heat Sink with Screw Pack
2 x LED Fan
1 x CPU Block with 4 Screws
1 x Cylindrical Water Reservoir (With 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
6 x Rigid Tube
1 x Water Pump with Shock Pad
6 x Two-Touch Fitting
1 x Water Feeder
1 x Water Plug
1 x Nipple Connector
1 x Vent Plug

IronBuddy G1/4 Rigid Tubing Fitting suitable for ID 10mm, OD 14mm metal or PETG rigid pipe tubing. Prefect for PC water cooling systems.

Materials: Nickel Plated Brass.

Color: Sliver.

Thread Size: G1/4”.

Package included: 4Pcs G1/4 to 10mm ID 14mm OD Rigid Tubing Fitting